Anti-Mould Emulsion Ultra™ White Paint | 500ml 1 Litre 2.5 Litre or 5 Litre | Siramico Coatings

Siramico's Anti-Mould Ultra Paint is based on a water-born, low VOC, low odour acrylic premium paint. It is used on interior walls and ceilings and is highly suitable for areas with mould and fungal build up. Anti-Mould Ultras anti-mould properties can prevent mould and blackspot growth for up to 10 years.

• Water Based and Environmentally Friendly
• No Solvents and silicone free
• Non-toxic and odour free when dry
• Available in Matt White
• Non caustic and non-injurious to the skin
• Suitable for Walls, Ceilings, Woodwork, Bathrooms, Shower Rooms, Kitchens, Bedrooms, Living Areas
• Long-lasting solution - Mould will not grow for the life of the paint film
• Good coverage - 7m² per litre, per coat, depending upon type of surface (usually one coat is sufficient)
• Ideal for use by Landlords who can face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants
• Made and tested in Britain (Oxfordshire)

ONCE DRY AND CURED ANTI MOULD ULTRA CAN BE PAINTED OVER TO ACHIEVE YOUR DESIRED COLOUR

PREPARATION

Surfaces to be painted should be cleaned and free from grease and contamination. Remove mould and treat with a suitable fungicidal solution. Allow freshly plastered walls at least 2 weeks to dry before use.

APPLICATION

Mix the product well with suitable mixing tool. Apply a good coat with a synthetic-type bristle brush. One coat will be sufficient; however, two coats will provide improved anti-mould performance. Do not apply at temperatures below 5C or in conditions of high humidity. You can also apply with a roller or spray (add 10% water to spray)

COVERAGE

On average 1-Litre will cover approximately 7 sqm in 1 coat depending on the porosity of the surface.

DRYING TIME

This paint will be touch dry in approximately 30 minutes, depending on humidity and temperature. min. application temp. 5C